• ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment
  • ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment
  • ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment
  • ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment
  • ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment
  • ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment
  • ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment

ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment

stars, based on ( 1 )reviews
₦36779.33 piece
0items available
ANDYCINE

ANDYCINE LunchBox III Magnalium Case for 2.5” SATA SSD to Atomos NINJA V/V+ Attachment


Brand: Andycine                                                  Model No.  LunchBox III


Key Features

Install 2.5” SATA SSDs Directly to NINJA V/V+

DIY Work Required Done to SSD

Slim Magnesium/Aluminum Construction

Only compatible with 2.5” SSD 860 EVO 1TB/2TB,870 EVO 1TB/2TB, 860 QVO 1TB/2TB/4TB,

870 QVO 1TB/2TB/4TB/8TB,

Compatible with Atomos Ninja V ,V+, Ninja Flame, Ninja Inferno, and Shogun Inferno



Overview

With some DIY work done to your SATA SSD, the LunchBox II Magnalium Case from ANDYCINE allows you to install the SSD directly to the slot on the back of the NINJA V. An 2.5” SATA SSD such as a Samsung 870/870 EVO or QVO has not to be removed from the case, just adapt your 2.5” SSD into the LunchBox III case, and then you're ready to connect and screw in the full assembly to your NINJA V. The LunchBox III provides a compact and economical alternative to other options used for the NINJA V and other recorder, with some DYI work required. 


Compatibility

860 EVO 1TB/2TB,

870 EVO 1TB/2TB, 

860 QVO 1TB/2TB/4TB,

870 QVO 1TB/2TB/4TB/8TB,

Compatible with Atomos Ninja V ,V+, Ninja Flame, Ninja Inferno, and Shogun Inferno



Installation Methodlunchbox iii

Intallation Methods

1.Tight the ssd onto luncbox III with screws,and slide into the atomos ninja v sink

2.Attach the lunchbox III directly on the ninja v sink, slide the ssd to attach the data reading port

Special features;

1.Without disassemble the SSD, protect your SSD

2.Plug and go, no DIY works need to be done

3.Hold the selected SSD tightly

4.The 2.5inch SSD thickness should under 6.7mm







Recent Reviews ( 1 )
BytheCameraVilleTuesday, 25 April 2023
Lunchbox III is the createive way to createa a hodler for 2.5inch SSD to use it on atomos ninja v v+, without disassembel the case ,reduce the failure to your SSD warranty protections. 1. Without disassemble on the SSD Case. 2. Not DIY work needed. 3. Plug and go. 4. Compatible with sumsung 870EV0 QV0 or other 2.5inch SSD which thickness under 6.8mm. link:https://youtu.be/B5DaF3B62fU

0 out of 0 found this review helpful.

+